Hardware

List of all the hardware I'm using and what I'm using it for.

Also has stuff of others that I want to keep track of.

Mine

Networking

Peripherals and Other

PC

PC

Laptop

Laptop

Phones & Tablets

Spares

Puzzles

3D Printers

Ender 3 V2

Cura settings

Start G-code:

; Ender 3 Custom Start G-code
; Heat up the bed and extruder at the same time, saves time, the power supply can handle it
M104 S{material_print_temperature_layer_0} ; Start heating extruder
M140 S{material_bed_temperature_layer_0}   ; Start heating bed
M109 S{material_print_temperature_layer_0} ; Wait for extruder to reach temp before proceeding
M190 S{material_bed_temperature_layer_0}   ; Wait for bed to reach temp before proceeding
G92 E0                                     ; Reset Extruder
G28                                        ; Home all axes
;G29                                        ; Mesh leveling (takes a while)
;M500                                       ; Save mesh
M420 S1                                    ; Load saved mesh
G1 Z2.0 F3000                              ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0                   ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15            ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0                ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30               ; Draw the second line
G92 E0                                     ; Reset Extruder
G1 Z2.0 F3000                              ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0                     ; Move over to prevent blob squish

End G-Code:

G91               ; Relative positioning
G1 E-2 F2700      ; Retract a bit
G1 E-2 Z0.2 F2400 ; Retract and raise Z
G1 X5 Y5 F3000    ; Wipe out
G1 Z10            ; Raise Z more
G90               ; Absolute positioning

G1 X0 Y{machine_depth} ; Present print
M106 S0                ; Turn-off fan
M104 S0                ; Turn-off hotend
M140 S0                ; Turn-off bed

M84 X Y E         ; Disable all steppers but Z
Filament specific settings

Printer itself

v4.2.2 mainboard

Upgrades:

Tools:

Firmware:

Marlin build instructions

https://marlinfw.org/docs/basics/auto_build_marlin.html

https://marlinfw.org/docs/basics/install_platformio_vscode.html

https://marlinfw.org/meta/download/

Grab latest stable or latest bugfix (see what's usually recommended at the time of flash), unzip and open its config folder, read that to download configurations too.

Relevant config for the Ender is in config/examples/Creality/Ender-3 V2/CrealityV422 - copy the two header files from the MarlinUI subfolder to the main firmware folder under Marlin subfolder, overwriting the defaults.

Screen FW needs to be in sync with printer FW, update from 4096 sector VFAT fs mkfs.vfat -S 4096 /dev/sdg, see Marlin config folder for instructions.

Printer FW won't update from a 4096 sector FS, use defaults (16k).

Elegoo Saturn

On the way!

Others


Revision #64
Created 29 June 2021 10:34:00 by C0rn3j
Updated 11 March 2024 16:01:43 by C0rn3j